— Shut down Windows and turn off the computer.
— No action (None).
To program these functions, click an option from the corresponding pull-down menu, and then click OK.
Hibernate Tab
The Hibernate tab lets you enable hibernate mode by clicking the Enable hibernate support check box.
Intel® SpeedStep™Tab
If your computer has a Mobile Intel®Pentium III processor, the Power Options Properties window includes the Intel® SpeedStep™ tab.
To change the Intel SpeedStep options, click the Advanced button and then click one of the following options:
l Disable Intel SpeedStep technology control
NOTE:If you are going to connect your computer to a port replicator, click None when you program the display-close option. This
setting ensures that your computer does not enter standby mode or hibernate mode when you close (lower) the display.
To Next Page
Loading...
