Need help?Do you have a question about the Dell Inspiron 14 5000 Series and is the answer not in the manual?
General| Display | 14-inch FHD (1920 x 1080) IPS |
|---|---|
| Operating System | Windows 10 Home or Pro |
| Ports | 1x HDMI 1.4b, 1x SD Card Reader, 1x Headphone/Microphone Combo |
| Wireless | 802.11ac Wi-Fi |
| Battery | 3-cell |
Detailed steps for safely disconnecting and removing the laptop battery, including prerequisites.
Step-by-step instructions for installing a new laptop battery correctly, including post-replacement steps.
Detailed steps for removing the hard drive, including prerequisites and handling precautions.
Detailed instructions on how to remove the hard drive assembly and its cable.
Step-by-step guide for installing a new hard drive, including bracket and cable connections.
Instructions for disconnecting antenna cables and removing the screw securing the wireless card.
Steps for aligning, seating, and securing the wireless card, including connecting antenna cables.
Lists the necessary steps before removing memory modules, including base cover and battery removal.
Detailed instructions on how to release securing clips and remove the memory module from its slot.
Guide on aligning the memory module notch and seating it securely into the slot.
Instructions to disconnect cables and remove screws securing the fan to the base frame.
Lists all components that must be removed before accessing the heat sink and handling precautions.
Instructions on removing screws in sequential order to detach the heat sink from the system board.
Steps for aligning the heat sink, securing it with screws, and ensuring proper thermal conductivity.
Comprehensive list of components to remove, notes, and steps before disconnecting cables from the system board.
Instructions to disconnect status-light board and touchpad cables from the system board.
Instructions to disconnect speaker, hard-drive, and power-adapter port cables from the system board.
Steps to remove screws and carefully lift the system board from the palm rest.
Steps for seating the system board, securing it with screws, and reconnecting various cables.
To Next Page
