Table 10. Storage specifications (continued)
Storage type Interface type Capacity
One M.2 2280 PCIe solid-state drive PCIe Gen 3.0 NVMe, up to 32 Gbps 1 TB
One M.2 2280 PCIe solid-state drive PCIe Gen 3.0 NVMe, up to 32 Gbps 2 TB
Intel Optane Memory H10 with solid-state storage
Intel Optane Memory technology utilizes 3D XPoint memory technology and functions as a non-volatile storage cache/
accelerator and/or storage device depending on the Intel Optane Memory installed in your computer.
Intel Optane Memory H10 with solid-state storage functions as both a non-volatile storage cache/accelerator (enabling
enhanced read/write speeds for hard-drive storage) and a solid-state storage solution. It neither replaces nor adds to the
memory (RAM) installed on your computer.
Table 11. Intel Optane Memory H10 with solid-state storage specifications
Description Values
Interface
PCIe 3 NVMe
Connector
M.2
Form factor 2280
Capacity (Intel Optane memory) Up to 32 GB
Capacity (solid-state storage) Up to 512 GB
NOTE: Intel Optane Memory H10 with solid-state storage is supported on computers that meet the following requirements:
● 9
th
Generation or higher Intel Core i3/i5/i7 processors
● Windows 10 64-bit version or higher (Anniversary Update)
● Intel Rapid Storage Technology driver version 15.9.1.1018 or higher
Media-card reader
The following table lists the media cards supported by your Inspiron 5406 2-in-1.
Table 12. Media-card reader specifications
Description Values
Media-card type
One SD card slot
Media-cards supported
● Secure Digital (SD)
● Secure Digital High Capacity (SDHC)
● Secure Digital Extended Capacity (SDXC)
NOTE: The maximum capacity supported by the media-card reader varies depending on the standard of the media card
installed in your computer.
16 Specifications of Inspiron 5406 2-in-1
To Next Page
Loading...
