Steps
Place the palm-rest and keyboard assembly on a clean and flat surface.
Next steps
1. Install the system board.
2. Install the display assembly.
3. Install the power-button board.
4. Install the touchpad.
5. Install the power-adapter port.
6. Install the fan.
7. Install the heat sink.
8. Install the speakers.
9. Install the I/O board.
10. Install the M.2 2230 solid-state drive or M.2 2280 solid-state drive, as applicable.
11. Install the memory modules.
12. Install the coin-cell battery.
13. Install the battery.
14. Install the base cover.
15. Follow the procedure in After working inside your computer.
52 Removing and installing components
To Next Page
Loading...
