Screw list
NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. Screw list
Component Secured to Screw type Quantity Screw image
Base cover Palm-rest and keyboard
assembly
M2x6 6
Battery Palm-rest and keyboard
assembly
M2x3 4
Hard-drive assembly Palm-rest and keyboard
assembly
M2x3 4
Hard-drive bracket Hard drive M3x3 4
Solid-state drive Palm-rest and keyboard
assembly
M2x2 Big Head 1
I/O board Palm-rest and keyboard
assembly
M2x3 1
Fan Palm-rest and keyboard
assembly
M2x3 2
Wireless card System board M2x3 1
Power-adapter port Palm-rest and keyboard
assembly
M2x3 1
System board Palm-rest and keyboard
assembly
M2x2 Big Head 4
Touchpad bracket Palm-rest and keyboard
assembly
M2x2 Big Head 3
Touchpad Palm-rest and keyboard
assembly
M2x2 Big Head 4
Display assembly Palm-rest and keyboard
assembly
M2.5x4 6
Display assembly Palm-rest and keyboard
assembly
M2x3 2
Display hinges Display back-cover and
antenna assembly
M2.5x2.5 Big Head 6
5
14 Screw list
To Next Page
Loading...
