5 Lift the USB Type-C port bracket o the system board.
6 Disconnect the speaker cable from the system board.
7 Open the latch and disconnect the keyboard cable from the system board.
8 Open the latch and disconnect the keyboard-backlight cable (optional) from the system board.
NOTE: Applicable only if your computer is shipped with a backlit keyboard.
9 Open the latch and disconnect the touchpad cable from the system board.
10 Open the latch and disconnect the hard-drive cable from the system board.
11 Disconnect the coin-cell battery cable from the system board.
12 Remove the ve screws (M2x2 Big Head) that secure the system board to the palm-rest and keyboard assembly.
13 Lift the system board o the palm-rest and keyboard assembly.
Removing the system board
59
To Next Page
Loading...
