Dell Inspiron 580 - Page 30

3. Replace the four screws that secure the power supply to the back of the chassis.

4. Connect the DC power cables to the system board and drives.

5. Secure all the cables to the securing clip on the side of the power supply.

6. Replace the computer cover (see Replacing the Computer Cover).


7. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page

NOTE: Route the DC power cables under the chassis tabs. The cables must be properly routed to prevent the cables from being damaged.
NOTE: Double-check all cable connections to make sure they are secure.
CAUTION: To help avoid damaging your computer, ensure that the voltage selector switch is set for the voltage that most closely matches the AC
power available in your location.