Dell Inspiron 580S - Replacing the Media Card Reader


Replacing the Media Card Reader

1. Follow the procedures in Before You Begin.

2. If this is a new Media Card Reader installation, remove the break-away metal plate. Align the tip of a Phillips screwdriver with the slot on the break-
away metal plate and rotate the screwdriver outwards to break and remove the metal plate.

3. If not present, attach the two shoulder screws to the Media Card Reader.
1
securing tab
2
shoulder screws (2)
3
Media Card Reader (not present on all computers)


NOTE: If you are replacing an existing Media Card Reader, remove the shoulder screws from the existing Media Card Reader and attach them to
the replacement Media Card Reader.