Dell Inspiron 6000 - Removing the Optical Drive; Replacing the Optical Drive

Back to Contents Page
 Optical Drive
DellInspiron™6000ServiceManual
Removing the Optical Drive
Replacing the Optical Drive
Removing the Optical Drive
Your computer ships with a fixed optical drive installed.

1. Follow the instructions in "Preparing to Work Inside the Computer."

2. Turn the computer over and remove the M2.5 x 8-mm screw.

3. Turn the computer over and remove the M2.5 x 8-mm screw from the indention labeled with a lock symbol ( ).

4. Insert a screwdriver into the indention and push the notch on the metal tab to release the drive from the bay.

5. Pull the drive out of the drive bay.
Replacing the Optical Drive

1. Slide the drive into the slot until it snaps securely into place.

2. Replace the M2.5 x 8-mm screw.
Back to Contents Page

CAUTION: Before you perform the following procedures, see the safety instructions in the Product Information Guide.
NOTICE: To prevent damage to devices, store them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or
placing heavy objects on top of them.
1
metal tab
2
optical drive