Dell Inspiron 600m - Front View Component Identification

Back to Contents Page
Keyboard
Dell™Inspiron™600mServiceManual



1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Turn the computer right-side up and open it.


3. Remove the center control cover:
a. Open the display all the way (180 degrees) so that it lies flat against your work surface.
b. Starting on the right side of the computer, use a plastic scribe to pry up the center control cover. Lift it away from the computer, and lay it aside.


CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
display
2
center control cover
3
computer base