Dell Inspiron 600m - Recommended Tools; Computer Orientation; Screw Identification

Recommended Tools
The procedures in this manual require the following tools:
l #1 Phillips screwdriver
l ¼-inch flat-blade screwdriver
l Small plastic scribe
l Flash BIOS update program floppy disk or CD
Computer Orientation


Screw Identification
When you are removing and replacing components, photocopy "Screw Identification" as a tool to lay out and keep track of the screws. The placemat provides
the number of screws and their sizes.



1
back
2
right
3
front
4
left
Optional Module:
(1 each)
Hard Drive:
(1 each)
Keyboard:
(2 each)