Dell Inspiron 600m - Bottom View Component Identification

Back to Contents Page
Speakers
Dell™Inspiron™600mServiceManual


1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the keyboard.
3. Remove the display assembly.
4. Remove the palm rest.
5. Disconnect the speaker connector from the system board connector.

6. Remove the M2.5 x 8-mm screw from the speakers.
7. Remove the M2.5 x 4-mm screw from the speakers.
8. Slightly pull the front of the computer away from the speakers, and remove the speakers by pulling them straight up and out of the computer base.
9. Remove the reserve battery from the speakers.



Back to Contents Page

CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: Handle the speakers with care to avoid damaging them.
1
speaker
5
M2.5 x 4-mm screw
2
speaker connector
6
computer base
3
system board connector
7
M2.5 x 8-mm screw
4
reserve battery

