124 Adding and Replacing Parts
NOTICE: The connectors are color-keyed to ensure correct insertion. If you feel resistance, check the connectors
and realign the card.
3
Install the replacement Mini-Card:
NOTICE: To avoid damaging the Mini-Card, make sure the antenna cables are not under the card when you click
the card into place.
a
Align the Mini-Card with the connector at a 45-degree angle, and press the Mini-Card into the
connector until it clicks.
NOTICE: To avoid damaging the Mini-Card, never place cables under the card.
b
Connect the antenna cables to the antenna connectors on the Mini-Card by matching the color of
the cable to the color of the triangle above the connector. Connect the main antenna cable (white)
to the antenna connector with the white triangle. Connect the auxiliary antenna cable (black) to
the antenna connector with the black triangle.
NOTE: If your computer has a gray cable, connect it to the connector with the gray triangle, if one is available on
your card.
1 metal securing tabs (2) 2 Mini-Card
2
1
To Next Page
Loading...
