Security
SED Block SID Authentication Enables or disables SED Block SID Authentication.
Default: Disabled
PPI Bypass for SED Block SID Command When there is no drive ownership and the ppibypassforblocksid
is enabled, BIOS requires user input while sending the Block SID
authentication command to SED drives. When
ppibypassforblocksid is disabled, BIOS does not require user
input while sending the Block SID command.
Default: Disabled
Firmware TPM Enable or disable the firmware TPM.
Default: Enabled
PPI Bypass for Clear Command Allows you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip BIOS
PPI user prompts when issuing the Clear command. Changes to
this setting take effect immediately.
Default: Disabled
UEFI Firmware Capsule Updates Enables or disables BIOS updates through UEFI capsule update
packages.
Default: Enabled
WINDOWS SMM SECURITY MITIGATIONS TABLE (WSMT) Enables or disables configuration of platform features on Dell
Client Systems with WSMT-enabled BIOS.
Default: Enabled
Table 6. System setup options—Boot menu
Boot
Fast Boot Enables or disables the fast boot option.
Default: Minimal
Secure Boot Enables or disables the secure boot feature.
Default: Disabled
Load Legacy Option ROMs Enables or disables the Load Legacy Option ROMs.
Default: Disabled
Boot List Option Displays the available boot options.
Default: UEFI
Attempt Legacy Boot Enables or disables legacy boot.
Default: Disabled
File Browser Add Boot Option Allows you to add the boot options.
Table 7. System setup options—Exit menu
Exit
Exit Saving Changes Allows you to exit system setup and save your changes.
Save Change Without Exit Allows you to save your changes without exiting the BIOS setup.
Exit Discarding Changes Allows you to exit the BIOS setup without saving the changes.
Load Optimal Defaults Allows you to restore default values for all system setup options.
Discard Changes Allows you to load previous values for all system setup options.
System setup 57
To Next Page
Loading...
