Dell Inspiron 8500 - Page 18

Back to Contents Page

Fan
Dell™Inspiron™8500/8600ServiceManual


1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the two M2.5 x 12 screws from the fan cover.


3. Lift the fan out of the computer.
Back to Contents Page

CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
M2.5 x 12-mm screws (2)
2
fan cover