Dell Inspiron 8500 - Page 21


4. Remove the keyboard:
a. Remove the two M2.5 x 6-mm screws across the top of the keyboard.

b. Rotate the keyboard up and slide it forward.
c. Hold the keyboard up and slightly forward to allow access to the keyboard connector.
d. Pull up on the keyboard connector tab to disconnect the keyboard connector from the system board.


Back to Contents Page

1
center control cover
2
system board connector
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.
1
M2.5 x 6-mm screws (2)
2
keyboard
3
palm rest