54 Using Batteries and Module Bay Devices
www.dell.com | support.dell.com
If the Device Screw Is Installed
1 Save and close any open files, exit any open programs, and shut down the computer
(see page 42).
2 If the computer is connected to a docking device (docked), undock it. See the
documentation that came with your docking device for instructions.
NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not
installed in the computer. Avoid pressing down on them or placing heavy objects on top of them.
3
Close the display and turn the computer over.
4 Use a #1 Phillips screwdriver to remove the device screw from the bottom of the
computer.
5 Press the device latch release.
device latch release
To Next Page
Loading...
