Dell Inspiron 8600 - If the Device Screw Is Installed

Using Batteries and Module Bay Devices 57
5 Insert the new device into the bay, and push the device until you feel a click.
Windows XP automatically recognizes the new device.
6 If necessary, enter your password to unlock your computer.
If the Device Screw Is Installed
1 Double-click the Safely Remove Hardware icon on the taskbar.
2 Click the device you want to eject.
3 If the computer is connected to a docking device (docked), undock it. See the
documentation that came with your docking device for instructions.
NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not
installed in the computer. Avoid pressing down on them or placing heavy objects on top of them.
4
Use a #1 Phillips screwdriver to remove the device screw from the bottom of the
computer.
5 Press the device latch release.
device latch release