42 | Removing the Power-Adapter Port
Removing the Power-Adapter Port
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the battery. See "Removing the Battery" on page 12.
2 Remove the base cover. See "Removing the Base Cover" on page 21.
3 Follow the instructions from step 1 to step 3 in "Removing the Hard Drive" on
page 25.
4 Remove the keyboard. See "Removing the Keyboard" on page 17.
5 Remove the palm-rest. See "Removing the Palm-Rest" on page 31.
book.book Page 42 Wednesday, April 10, 2013 11:37 AM
To Next Page
Loading...
