Dell Inspiron M431R - Procedure; Replacing the Display Bezel; Postrequisites

62 | Replacing the Display Bezel
Replacing the Display Bezel
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align the display bezel with the display back-cover, and gently snap the
display bezel into place.
2 Align the hinge covers with the hinges on the display assembly and snap the
hinge covers into place.
Postrequisites
1 Replace the display assembly. See "Replacing the Display Assembly" on page 59.
2 Follow the instructions from step 3 to step 9 in "Replacing the System Board" on
page 49.
3 Replace the palm-rest. See "Replacing the Palm-Rest" on page 35.
4 Replace the keyboard. See "Replacing the Keyboard" on page 20.
5 Replace the base cover. See "Replacing the Base Cover" on page 22.
6 Follow the instructions from step 3 to step 4 in "Replacing the Optical Drive" on
page 16.
7 Replace the battery. See "Replacing the Battery" on page 13.
book.book Page 62 Wednesday, April 10, 2013 11:37 AM