Dell Inspiron Zino - Top Bracket; Removing the Top Bracket; Replacing the Top Bracket

Back to Contents Page
 Top Bracket
Dell™Inspiron™300/400ServiceManual
Removing the Top Bracket
Replacing the Top Bracket


Removing the Top Bracket

1. Follow the procedures in Before You Begin.

2. Remove the top cover (see Removing the Top Cover).

3. Inspiron 400 — Remove the two screws that secure the wireless antennas to the top bracket.

4. Remove the screw that secures the top bracket to the chassis.

5. Lift the top bracket away from the computer.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
1
screws (2)
2
wireless antennas (2)