16 Quick Reference Guide
To remove the battery:
1
If the computer is connected to a docking device (docked), undock it. See the documentation that
came with your docking device for instructions.
2
Ensure that the computer is turned off.
3
Slide the battery-bay latch lock on the bottom of the computer away from the battery.
4
Slide and hold the battery-bay latch release, and then remove the battery from the bay.
To replace the battery, follow the removal procedure in reverse order.
Storing a Battery
Remove the battery when you store your computer for an extended period of time. A battery discharges
during prolonged storage. After a long storage period, recharge the battery (see "Charging the Battery" on
page 15) fully before you use it.
Troubleshooting
Lockups and Software Problems
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
1 battery 2 battery-bay latch release 3 battery-bay latch lock
2
1
3
To Next Page
Loading...
