Option Description
Boot Sequence
Allows you to change the order in which the computer attempts to
find an operating system.
The options are:
• Windows Boot Manager
• Onboard NIC(IPV4)
• Onboard NIC(IPV4)
Allows you to change the boot list options.
Click one of the following options:
• Legacy External Devices
• UEFI—Default
Advanced Boot Options
Allows you to Enable Legacy Option ROMs.
The options are:
• Enable Legacy Option ROMs
• Enable Attempt Legacy Boot
UEFI Boot Path Security
Allows you to control whether the system prompts the user to
enter the Admin password when booting to a UEFI boot path.
Click one of the following options:
• Always, Except Internal HDD—Default
• Always
• Never
Date/Time
Allows you to set the date and time. The change to the system
date and time takes effect immediately.
System configuration
Table 24. System Configuration
Option Description
Integrated NIC
Allows you to configure the integrated network controller.
Enable UEFI Network Stack : Enabled by Default.
Click one of the following options:
• Disabled: The internal LAN is off and not visible to the
operating system.
• Enabled : The internal LAN is enabled.
• Enabled w/PXE: The internal LAN is enabled (with PXE boot)
—Default
SATA Operation
Allows you to configure the operating mode of the integrated SATA
hard-drive controller.
Click one of the following options:
• Disabled
• AHCI
• RAID On—Default
NOTE: SATA is configured to support RAID mode.
22 Podešavanje sistema
To Next Page
Loading...
