Next steps
1. Replace the keyboard.
2. Replace the coin cell battery.
3. Replace the system board.
NOTE: System board can be replaced with heatsink assembly attached.
4. Replace the WLAN card.
5. Replace the DC-in.
6. Replace the memory module.
7. Replace the speaker.
8. Replace the battery.
9. Replace the base cover.
10. Replace the microSD card.
11. Follow the procedure in after working inside your computer.
Power button
Removing the power button with fingerprint reader
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
88
Disassembly and reassembly
To Next Page
Loading...
