Dell Latitude 5420 Rugged - System Configuration

Option Description
UEFI Boot Path Security
Allows you to control whether the system prompts the user to enter
the Admin password when booting to a UEFI boot path.
Click one of the following options:
• Always, Except Internal HDD—Default
• Always
• Never
Date/Time
Allows you to set the date and time. The change to the system date
and time takes eect immediately.
System conguration
Table 29. System Conguration
Option Description
Integrated NIC
Allows you to congure the integrated network controller.
Click one of the following options:
• Disabled
• Enabled
• Enabled w/PXE—Default
Onboard Unmanaged NIC
Allows you to enable / disable onboard USB LAN controller.
Serial Port 1
Allows you to congure(disable and re-mapping) the serial port(s).
Click one of the following options:
• Disabled
• Com1—Default (Port is congured with 3F8h with IRQ 4
• Com3 (Port is congured with 3E8h with IRQ 4
NOTE: Serial Port 2 is available when the system has
Serial Port in the rear congurable I/O space.
Serial Port 2
SATA Operation
Allows you to congure the operating mode of the integrated SATA
hard-drive controller.
Click one of the following options:
• Disabled
• AHCI
• RAID On—Default
NOTE: SATA is congured to support RAID
mode.
SMART Reporting
This eld controls whether hard drive errors for integrated drives
are reported during system startup. This technology is part of the
S.M.A.R.T (Self Monitoring Analysis and Reporting Technology)
specication. This option is disabled by default.
• Enable SMART Reporting
System setup 25