Keys Navigation
Esc Moves to the previous page until you view the main screen. Pressing Esc in the main screen displays a
message that prompts you to save any unsaved changes and restarts the system.
System setup options
NOTE: Depending on the and its installed devices, the items listed in this section may or may not appear.
General options
Table 27. General
Option Description
System Information
This section lists the primary hardware features of your
computer.
The options are:
● System Information
● Memory Configuration
● Processor Information
● Device Information
Battery Information Displays the battery status and the type of AC adapter
connected to the computer.
Boot Sequence
Allows you to change the order in which the computer
attempts to find an operating system.
The options are:
● Windows Boot Manager
● Boot List Option-UEFI is the enabled by default.
UEFI Boot Path Security
Allows you to control whether the system prompts the user to
enter the Admin password when booting to a UEFI boot path.
Click one of the following options:
● Always, Except Internal HDD—Default
● Always
● Never
Date/Time
Allows you to set the date and time. The change to the
system date and time takes effect immediately.
System configuration
Table 28. System Configuration
Option Description
Integrated NIC
Allows you to configure the integrated network controller.
Click one of the following options:
● Disabled
● Enabled
● Enabled w/PXE—Default
Onboard Unmanaged NIC
Allows you to enable / disable onboard USB LAN controller.
24 System setup
To Next Page
Loading...
