Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card.
3. Remove the base cover.
4. Remove the 4G WWAN card or 5G WWAN card, as applicable.
5. Remove the wireless card.
6. Remove the memory modules.
7. Remove the M.2 2230 or M.2 2280 SSD from slot 1, as applicable.
8. Remove the M.2 2230 SSD from slot 2, if applicable.
9. Remove the battery.
10. Remove the assembly-inner frame.
11. Remove the system board.
NOTE: The system board can be removed and installed with the heat sink attached in order to simplify the procedure
and preserve the thermal bond between the system board and heat sink.
About this task
The following images indicate the location of the keyboard and provide a visual representation of the removal procedure.
Figure 65. Removing the keyboard
Removing and installing Field Replaceable Units (FRUs)
103
To Next Page
Loading...
