Dell Latitude 7389 2-in-1 - Installing the WLAN Card

NOTE: To remove both cards if equipped and no need to remove the blank ller.
c base cover
d battery
NOTE: Disconnect and remove the battery from the system board.
3 To remove the WLAN card:
a Remove the M2.0 x 3.0 screw that secures the metal bracket to the WLAN card [1].
b Lift the metal bracket [2].
c Disconnect the WLAN cables from the connectors on the WLAN card [3].
d Remove the WLAN card [4].
Installing the WLAN card
1 Insert the WLAN card into the connector on the system board.
2 Connect the WLAN cables to the connectors on the WLAN card.
3 Place the metal bracket and replace the M2.0 x 3.0 screw to secure WLAN card to the computer.
4 Install the:
a battery
b base cover
c SIM card
d MicroSD card
NOTE
: To install both cards if equipped.
5 Follow the procedure in After working inside your computer.
Extracción e instalación de componentes
15