Next steps
1. Install the power-button assembly.
2. Install the system board.
NOTE:
The system board can be installed as an assembly with the fan and heat-sink assembly, ethernet and audio
board, and USB board attached.
3. Install the power adapter port.
4. Install the speakers.
5. Install the memory modules.
6. Install the wireless card.
7. Install the solid-state drive.
8. Install the display assembly.
9. Install the keboard-controller board.
10. Install the touchpad
11. Install the rear cover.
12. Install the battery.
13. Install the base cover.
14. Follow the procedure in After working inside your computer.
78
Removing and installing Field Replaceable Units (FRUs)
79 / 102 78 / 100 79 / 102
To Next Page
Loading...
