Dell OptiPlex 160 - Memory; Removing a Memory Module; Replacing a Memory Module

DELL™ OPTIPLEX™ 160 TECHNICAL GUIDEBOOK
22
ACOUSTIC NOISE EMISSION INFORMATION
O P TIPLEX 1 6 0
Component Typical Configuration High-end Configuration
CPU
Intel Atom 230 Processor (1.6GHz, 512KB L2
cache, 533MHz FSB)
Intel Atom 330 Processor (1.6GHz, 1MB L2
cache, 533MHz FSB)
Memory2 1 GB DDRII 800MHz 4 GB DDRII 800MHz
HDD (#, capacity) 80 GB 7200 RPM SATA 160 GB 7200 RPM SATA
WLAN NA 1397 Half Mini-card
Graphics Adapter Integrated Adapter Integrated Adapter
The Declared Noise Emission in accordance with ISO 9296 for the Dell OptiPlex 160 is as follows
1,2
:
(all values L
WAd
expressed in bels; 1 bel=10 decibels, re 10
-12
Watts)
Operating Mode
Typical Configuration
Declared Sound Power (L
WAd
)
High-end Configuration
Declared Sound Power (L
WAd
)
Idle
1.8
4
2.7
HDD Operating
NA 2.7
90% CPU
1.8
4
2.7
The Declared A-weighted Sound Pressure Level in decibels (re 2x10
-5
Pa), at Operator, Bystander, and Desk Side Positions are
measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordance with ISO 9296 for this product is as
follows
1,3
:
Operating Mode
Typical Configuration
Declared Sound Pressure (L
pA
)
High-end Configuration
Declared Sound Pressure (L
pA
)
Operator Position (L
pA
) Bystander Position (L
pA
) Operator Position (L
pA
) Bystander Position (L
pA
)
Idle
12” 11* 16 13
HDD Operating
NA NA 16 13
90% CPU
12* 12* 16 14
1
All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system
CPU was stressed at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO 7779,
but was measured using the same microphone distances and measurement techniques defined for the other reported operating
modes.
2
Declared Sound Power rounded to nearest tenth of a bel per ISO 9296 section 4.4.2
3
Declared Sound Pressure rounded to nearest dB per ISO 9296 section 4.4.3.
4
Sound Power/ Sound Pressure levels were not sufficiently above background noise levels of the acoustic measurement chamber
for accurate 9296 declaration. True levels may be lower than published herein.