Dell OptiPlex 170L - Chassis Speaker; Installing the Optional Chassis Speaker; Removing the Chassis Speaker

Back to Contents Page

Chassis Speaker
Dell™OptiPlex™170LUser'sGuide
Installing the Optional Chassis Speaker
Removing the Chassis Speaker

Installing the Optional Chassis Speaker

1. Follow the procedures in "Before You Begin."
2. Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
3. Insert the four tabs on the speaker into four slots on the chassis.
4. Slide the speaker toward the hard drive until the speaker is seated securely.
5. Attach the cable to the connector on the I/O panel.
Desktop Computer














Minitower Computer

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
1
chassis slots (4)
2
speaker tabs (4)
3
chassis speaker