Dell OptiPlex 170L - Replacing the Computer Cover

Back to Contents Page

Replacing the Computer Cover
Dell™OptiPlex™170LUser'sGuide

1. Ensure that all cables are connected, and fold cables out of the way.
2. Ensure that no tools or extra parts are left inside the computer.
3. On the small desktop computer:
a. Pivot the cover down.
b. Press down on the right side of the cover until it closes.
c. Press down on the left side of the cover until it closes.
d. Ensure that both sides of the cover are locked. If not, repeat stepb.
4. On the mini-tower computer, place the cover on the computer and slide the cover toward the front of the computer until it fits completely into place.

5. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page

CAUTION: Before you begin this procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.