Dell OptiPlex 170L - Page 55


6. Remove the I/O panel and disconnect the sound/USB cable from the I/O panel.
7. Attach the sound/USB cable to the new I/O panel.
8. Insert the I/O panel into the I/O cage and replace the screws that you removed in step5.


9. Reattach the front panel to the side hinges, and then rotate it until it snaps onto the front of the computer.

1
screws (2)
2
I/O panel
3
sound/USB cable
4
tie wrap cord
1
screws (2)
2
I/O panel
3
I/O cage