Back to Contents Page
Standard Back Plate
Dell™OptiPlex™380ServiceManual—Desktop
Removing the Standard Back Plate
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the riser assembly.
3. Lift the standard back plate and remove it from the computer.
Replacing the Standard Black Plate
To replace the standard black plate, perform the above steps in reverse order.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
To Next Page
Loading...
