2
Removing and installing components
This section provides detailed information on how to remove or install the components from your
computer.
Recommended tools
The procedures in this document require the following tools:
• Small flat blade screwdriver
• Phillips screwdriver
• Small plastic scribe
Removing the cover
1. Follow the procedure in Before Working Inside Your Computer.
2. To remove the cover:
a. Slide the blue tab to release the cover from the computer [1].
b. Slide the cover toward the back of the computer and lift it away from the computer [2].
Installing the cover
1. Place the cover on the computer and slide the cover forward until it clicks into place.
2. Follow the procedure in After Working Inside Your Computer.
8
To Next Page
Loading...
