Dell OptiPlex 5270 All-in-One - Page 33

Option Description
NOTE: Successful password changes take eect immediately.
Default setting: Not set
Internal HDD-0
Password
Allows you to set, change or delete the system’s internal hard disk’s password.
Default setting: Not set
NOTE: Successful password changes take eect immediately.
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
NOTE: If Strong Password is enabled, Admin and System passwords must contain at least one uppercase
character, one lowercase character and be at least 8 characters long.
Password
Conguration
Allows you to determine the minimum and maximum length of Administrator and System passwords.
Password Bypass Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they
are set. The options are:
• Disabled
• Reboot bypass
Default setting: Disabled
Password Change Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is
set.
Default setting: Allow Non-Admin Password Changes is selected.
UEFI Capsule
rmware Updates
This option controls if the system allows BIOS updates via UEFI capsule update package.
• Default setting: Enable UEFI Capsule Firmware Updates is selected.
TPM 2.0 Security Allows you to enable the Trusted Platform Module (TPM) during POST. This option is enabled by default. The
options are:
• TPM On (Default)
• Clear
• PPI Bypass for Enabled Commands
• PPI Bypass for Disabled Commands
• PPI Bypass for Clear Commands
• Attestation Enable (Default)
• Key Storage Enable (Default)
• SHA - 256 (Default)
• Firmware-TPM (Discrete TPM disabled)
NOTE: Activation, deactivation, and clear options are not aected if you load the setup program's default
values. Changes to this option take eect immediately.
Computrace (R) Allows you to activate or disable the optional Computrace software The options are:
• Deactivate
• Disable
System setup 33