EasyManua.ls Logo

Dell OptiPlex 7080 Small Form Factor - Power Ratings

Dell OptiPlex 7080 Small Form Factor
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
One M.2 2230/2280 solid-state drive (class 35 or class 40) and two 2.5 inch hard-disk drives
One M.2 2230/2280 solid-state drive and one M.2 2230 solid-state drive through media card reader
One 2.5 inch hard-disk drive and one M.2 16/32 GB Intel Optane memory
Two 2.5 inch hard-disk drives and one M.2 16/32 GB Intel Optane memory
One 3.5 inch hard-disk drive and one M.2 16/32 GB Intel Optane memory
One 3.5 inch/2.5 inch hard-disk drive and one M.2 16/32 GB Intel Optane memory
The primary drive of your computer varies with the storage configuration. For computers:
with a M.2 solid-state drive, the M.2 solid-state drive is the primary drive
without a M.2 drive, either the 3.5-inch hard drive or one of the 2.5-inch hard drives/Solid state drive is the primary drive
with a M.2 16 or 32 GB Intel Optane memory, the 2.5-inch hard-disk drive is the primary drive
Table 13. Storage specifications
Storage type Interface type Capacity
2.5-inch, 5400 RPM, hard-disk drive SATA 3.0 Up to 2 TB
2.5-inch, 7200 RPM, hard-disk drive SATA 3.0 Up to 1 TB
2.5-inch, 7200 RPM, FIPS Self Encrypting Opal 2.0, hard-
disk drive
SATA 3.0 Up to 500 GB
3.5-inch, 5400 RPM, hard-disk drive SATA 3.0 4 TB
3.5-inch,7200 RPM, hard-disk drive SATA 3.0 Up to 2 TB
M.2 2230 solid-state drive PCIe 3 Gen x4 NVMe, Class 35 Up to 512 GB
M.2 2280 solid-state drive PCIe 3 Gen x4 NVMe, Class 40 Up to 2 TB
M.2 2280 Opal Self-Encrypting solid-state drive PCIe 3 Gen x4 NVMe, Class 40 Up to 1 TB
Power ratings
Table 14. Power ratings specifications
Type
200 W (80 PLUS Bronze) 200 W (80 PLUS Platinum)
Input voltage
90 VAC to 264 VAC 90 VAC to 264 VAC
Input frequency
47 Hz to 63 Hz 47 Hz to 63 Hz
Input current (maximum)
3.2 A 3.2 A
Output current (continuous)
+12 VA/16.50 A
+12 VB/14 A
+12 VSB/2.50 A
Standby mode:
+12 VA/1.5 A
+12 VB/2.5 A
+12 VA/16.50 A
+12 VB/14 A
+12 VSB/2.50 A
Standby mode:
+12 VA/1.5 A
+12 VB/2.5 A
Rated output voltage
+12 VA
+12 VB
+12 VA
+12 VB
Temperature range
Operating
5°C to 45°C (41°F to 113°F) 5°C to 45°C (41°F to 113°F)
Technical specifications 19

Other manuals for Dell OptiPlex 7080 Small Form Factor

Related product manuals