Why does my Dell Monitor show Diagnostic Error Codes indicated by LED?
- JJennifer GriffinOct 26, 2025
If your Dell Monitor shows Diagnostic Error Codes indicated by LED, here are some potential causes and solutions: * Faulty system board: Check faulty system board. * Faulty system board, power supply unit (PSU), or cabling: Check for issues with power supply unit (PSU), or cabling. * Faulty system board, CPU, or DIMMS: Check for issues with CPU or DIMMS. * Faulty coin cell battery: Replace the faulty coin cell battery. * Auto-Recovery trigger, recovery image is not found or is invalid: Check BIOS Recovery for recovery image issues. * Memory SPD failure: Investigate memory SPD failure. * No memory detected: Check if memory is installed. * Modules incompatible or invalid configuration: Ensure memory modules are compatible. * On-demand trigger, recovery image is not found: ...













