About this task
The following image provides a visual representation of the fixed stand installation procedure.
Steps
1. Align the tabs on the stand with the slots on the back cover.
2. Snap the stand until it clicks into place.
Next steps
1. Follow the procedure in After working inside your computer.
Removing the articulating stand
Prerequisites
1. Follow the procedure in Before working inside your computer.
CAUTION:
When servicing the system, place it on an elevated, clean, and flat surface. It is recommended to remove the
stand to avoid accidental damage to the system display during servicing.
About this task
The following image provides a visual representation of the articulating stand removal procedure.
Removing and installing components
13
To Next Page
Loading...
