EasyManua.ls Logo

Dell OptiPlex 755 - System Board Connector Maximum Allowable Dimensions; Graphics;Video Controller

Dell OptiPlex 755
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
version 1.0 15
DELL™ OPTIPLEX™ 755 TECHNICAL GUIDE
15
MT DT SFF USFF
PCI Slot(s) Dimensions: (HxL)
2 2 1
Height i n c h e s /c e n t i m e t e r s
4.376 / 11.115 2.731 / 6.89
Length i n c h e s /c e n t i m e t e r s
6.6 / 16.765* 6.6 / 16.765
PCIe x16 Slot Dimensions: (HxL)
1 1 1
Height i n c h e s /c e n t i m e t e r s
4.376 / 11.115 2.731 / 6.89
Length i n c h e s /c e n t i m e t e r s
6.6 / 16.765* 6.6 / 16.765
PCIe x1 Slot Dimensions: (HxL)
1
Height i n c h e s /c e n t i m e t e r s
4.376 / 11.115
Length i n c h e s /c e n t i m e t e r s
6.6 / 16.765
Combo Full Height Riser with 1 PCI and
1 PCIe connector (HxL)
1 /1
Height i n c h e s /c e n t i m e t e r s
4.376 / 11.115
Length i n c h e s /c e n t i m e t e r s
6.9 / 17.53**
Dual Full Height Riser with 2 PCI connectors
(HxL)
2
Height i n c h e s /c e n t i m e t e r s
4.376 / 11.115
Length i n c h e s /c e n t i m e t e r s
6.9 / 17.53**
systEM boarD connEctor MaxiMuM aLLowabLE DiMEnsions
* Card length can be longer than standard Half-Length Card but cannot be a Full-Length Card.
** 6.9/17.53 in/cm is longer than the standard Half-Length Card. Risers replace 1 PCl slot and 1 PCle slot on DT system board.
MT DT SFF USFF
Integrated Intel
®
Graphics Media
Accelerator 3100*
Integrated on system board
Enhanced Graphic/Video Options
DVI (Digital)
Optional full height or low prole Add-2 card
Native DVI
Connector
graphics/viDEo controLLEr
MT supports full height card, DT supports low prole card or full height card with optional riser. SFF supports low prole card.
* Signicant memory may be used to support graphics, depending on system memory size and other factors.

Other manuals for Dell OptiPlex 755

Related product manuals