26 Quick Reference Guide
Jumper Settings
1 speaker connector (INT_SPKR) 12 RTC reset jumper (RTCRST)
2 fan (FAN_CPU) 13 intrusion switch connector
(INTRUDER)
3 processor connector (CPU) 14 battery socket (BATTERY)
4 processor power connector
(12VPOWER)
15 PCI Express x16 connector (SLOT1)
5 memory module connectors
(DIMM_1, DIMM_2, DIMM_3,
DIMM_4)
16 PCI Express x1 connector (SLOT4)
6 password jumper (PSWD) 17 PCI connector (SLOT2)
7 SATA drive connectors (SATA0,
SATA1, SATA2, SATA3)
18 PCI connector (SLOT3)
8 front-panel connector (FRONTPANEL) 19 serial connector (SERIAL2)
9 power connector (POWER) 20 system board speaker (BEEP)
10 external SATA connector (eSATA) 21 aux power LED (AUX_LED)
11 internal USB (INT_USB) 22 floppy connector (DSKT)
Jumper Setting Description
PSWD Password features are enabled
(default setting).
Password features are disabled.
To Next Page
Loading...
