40 Quick Reference Guide
Back View
1 card slots (2) Access connectors for any installed PCI cards, PCI Express
cards, PS/2, eSATA, and so on.
2 back panel
connectors
Plug serial, USB, and other devices into the appropriate
connectors (see "Back Panel Connectors" on page 41).
3 power connector Insert the power cable.
4 voltage selection
switch
Your computer is equipped with a manual voltage-selection
switch. To help avoid damaging a computer with a manual
voltage selection switch, set the switch for the voltage that
most closely matches the AC power available in your
location.
NOTICE: In Japan, the voltage selection switch must be
set to the 115-V position.
Also, ensure that your monitor and attached devices are
electrically rated to operate with the AC power available in
your location.
5 padlock ring Insert a padlock to lock the computer cover.
6 cover release
latch
Allows you to open the computer cover.
51 2 3 4
6
To Next Page
Loading...
