42 Quick Reference Guide
3 network adapter
connector
To attach your computer to a network or broadband device,
connect one end of a network cable to either a network jack
or your network or broadband device. Connect the other
end of the network cable to the network adapter connector
on the back panel of your computer. A click indicates that
the network cable has been securely attached.
NOTE: Do not plug a telephone cable into the network
connector.
Remote management features require use of the onboard
NIC.
It is recommended that you use Category 5 wiring and
connectors for your network. If you must use Category 3
wiring, force the network speed to 10 Mbps to ensure
reliable operation.
4 network activity
light
Flashes a yellow light when the computer is transmitting or
receiving network data. A high volume of network traffic
may make this light appear to be in a steady "on" state.
5 line-out
connector
Use the green line-out connector (available on computers
with integrated sound) to attach headphones and most
speakers with integrated amplifiers.
6 line-
in/microphone
connector
Use the blue and pink line-in/microphone connector
(available on computers with integrated sound) to attach a
record/playback device such as a cassette player, CD player,
or VCR; or a personal computer microphone for voice or
musical input into a sound or telephony program.
7 USB 2.0
connectors (6)
Use the back USB connectors for devices that typically
remain connected, such as printers and keyboards.
To Next Page
Loading...
