Dell OptiPlex GX200 User Manual

Dell™OptiPlex™GX200ServiceManual
Small Form-Factor Chassis — Removing and Replacing Parts
Low-Profile Chassis — Removing and Replacing Parts
Midsize Chassis — Removing and Replacing Parts
Mini Tower Chassis — Removing and Replacing Parts
Notes, Notices, and Cautions
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, notices,
and cautions, and they are used as follows:
Information in this document is subject to change without notice.
©2000 Dell Computer Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden.
Trademarks used in this text: Dell and OptiPlex are trademarks of Dell Computer Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Computer Corporation
disclaims any proprietary interest in trademarks and trade names other than its own.
Initial release: 18 April 2000
Last revised: 31 Jul 2000
NOTE: A NOTE indicates important information that helps you make better use of your system.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury.

Dell OptiPlex GX200 Specifications

General

Brand	Dell
Model	OptiPlex GX200
Category	Desktop
Language	English

Summary

Low-Profile Chassis Service Procedures

Precautionary Measures

Safety guidelines and ESD prevention steps before performing any service procedures.

Computer Cover Removal

Steps to remove the system's outer cover for access to internal components.

Drive Assembly Service

Procedures for removing and installing storage devices like hard drives and diskette drives.

System Board Replacement

Detailed steps for removing and installing the main system board.

Midsize Chassis Service Procedures

Precautionary Measures

Safety guidelines and ESD prevention for midsize chassis servicing.

Computer Cover Removal

Steps to remove the outer cover of the midsize chassis for component access.

Drive Assembly Service

Procedures for servicing storage devices within the midsize chassis.

System Board Replacement

Instructions for removing and installing the system board in a midsize chassis.

Mini Tower Chassis Service Procedures

Precautionary Measures

Essential safety steps and ESD prevention for mini tower systems.

Computer Cover Removal

How to remove the computer cover for the mini tower chassis.

Front Bezel Removal

Steps to detach and remove the front panel bezel from the mini tower.

Drive Assembly Service

Procedures for handling storage devices in the mini tower chassis.

System Board Replacement

Instructions for servicing the system board in a mini tower computer.