Steps
1. Place the side cover on the chassis.
2. Align the tabs on the side cover with the slots on the chassis.
3. Slide the side cover into place towards the front of the computer.
4. Tighten the thumb-screw (6x32) that secure the side cover to the chassis.
Next steps
1. Follow the procedure in After working inside your computer.
Front bezel
Removing the front bezel
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the side cover.
About this task
The following image(s) indicate the location of the front bezel and provides a visual representation of the removal procedure.
Removing and installing Customer Replaceable Units (CRUs)
33
To Next Page
Loading...
