Dell P117F - Page 83

Table 38. System setup options—Update, Recovery menu (continued)
Update, Recovery
By default, the threshold value is set to 2.
Table 39. System setup options—System Management menu
System Management
Service Tag Displays the Service Tag of the system.
Asset Tag Create a system Asset Tag.
AC Behavior
Wake on AC Enable or disable the wake on AC option.
By default, the option is disabled.
Auto on Time Enable to set the system to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
Table 40. System setup options—Keyboard menu
Keyboard
Numlock Enable Allows you to enable or disable the Numlock function when the system boots.
By default, the option Fn Lock Options is enabled.
Fn Lock Options By default, the Fn lock option is enabled.
Lock Mode By default, the Lock Mode Secondary option is enabled. With this option, the
F1-F2 keys scan the code for their secondary functions.
Table 41. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
Enable Adapter Warnings Enable or disable the warning messages during boot when the adapters with
less power capacity are detected.
By default, the option is enabled.
Warning and Errors Enable or disable the action to be done when a warning or error is encountered.
By default, the Prompt on Warnings and Errors option is enabled.
USB-C Warnings
Enable Dock Warning Messages
By default, the option is enabled.
Fastboot Allows you to configure the speed of the UEFI boot process.
By default, the Minimal option is enabled.
Extend BIOS POST Time Set the BIOS POST load time.
By default, the 0 seconds option is enabled.
Table 42. System setup options—Virtualization menu
Virtualization
Intel Virtualization Technology
Enable Intel Virtualization Technology
(VT)
When enabled, the system will be able to run a Virtual Machine Monitor
(VMM).
BIOS setup 83