To Next PageTo Next PageWhy does my Dell Laptop have a display failure?
A display failure in your Dell Laptop can occur due to a couple of reasons: * A failure on the LCD power rail of the system board, which means no power is supplied to the LCD. If this is the case, the battery status LED will flash an error code [2,8]. * The display cable may not be connected properly. If this is the reason, the battery status LED will flash an error code [2,7].
What to do if my Dell P125F001 has memory or RAM failure?
If your Dell Laptop experiences a memory or RAM failure, verify that the memory module is properly installed. If the issue persists, consider replacing the memory module.
What to do if my Dell P125F001 Laptop battery is swollen?
If your Dell Laptop battery is swollen, immediately stop using the laptop. Disconnect the AC adapter and allow the battery to fully discharge. Replace the swollen battery and dispose of it properly. You may also contact Dell product support to explore options for replacing the battery under warranty or service contract terms.
How to fix CMOS battery failure on a Dell Laptop?
To address a CMOS battery failure on your Dell Laptop, try resetting the CMOS battery connection. If the problem continues, replace the coin-cell battery.
What to do if BIOS recovery image is not found on Dell P125F001 Laptop?
If the BIOS recovery image is not found on your Dell Laptop, flash the latest BIOS version. If the problem persists, the system board may need to be replaced.
How to fix System BIOS Flash corruption on Dell P125F001 Laptop?
If your Dell Laptop has System BIOS Flash corruption detected by SBIOS, and if the problem continues, replace the system board.
How to fix PCI of video card/chip failure on Dell P125F001?
To fix a PCI failure of the video card or chip on your Dell Laptop, replace the system board.
What to do if there is a power-rail failure on Dell P125F001 Laptop?
If your Dell Laptop experiences a power-rail failure, which means the EC ran into a power sequencing failure, and if the problem persists, replace the system board.
How to resolve EC unable to program i-Fuse error on Dell Laptop?
To resolve an EC unable to program i-Fuse error on your Dell Laptop, replace the system board.
What to do if short in hinge cable tripped OCP1 on Dell P125F001 Laptop?
If a short in the hinge cable tripped OCP1 on your Dell Laptop, check if the display-assembly cable (EDP) is properly seated or pinched at the hinges. If the problem persists, replace either the display-assembly cable (EDP) or the display assembly (LCD).
General| Category | Laptop |
|---|---|
| Storage | 256GB SSD |
| Model | P125F001 |
| Processor | Intel Core i5 |
| RAM | 8GB |
| Operating System | Windows 10 |
| Battery | 3-cell 42Whr |
