What to do if my Dell P139G does not power on?
If your Dell Laptop won't power on or boot into the operating system, try this: turn off your computer, disconnect the power adapter, remove the base cover and the battery. Then, press and hold the power button for 20 seconds to drain any residual power. Reinstall the battery and base cover, connect the power adapter, and then turn on your computer.
How to fix Memory/RAM failure on Dell P139G?
If your Dell laptop is experiencing memory or RAM failure, try resetting and swapping the memory modules among the slots. If the issue continues, consider replacing the memory module.
What to do if Dell P139G Laptop battery is swollen?
If you notice swollen rechargeable Li-ion batteries in your Dell Laptop, discontinue using the laptop. Discharge it by disconnecting the AC adapter and letting the battery drain. Replace the swollen battery and dispose of it properly. You may also contact Dell product support for options to replace the swollen battery under your warranty or service contract, including replacement by a Dell authorized service technician.
What to do if Dell P139G says invalid memory installed?
If your Dell laptop indicates that invalid memory is installed, attempt to reset and swap the memory modules between the slots. If the problem remains, you may need to replace the memory module.
What to do if my Dell P139G Laptop battery is swollen?
If you notice that your Dell Laptop battery is swollen, immediately stop using the laptop. Disconnect the AC adapter and allow the battery to fully discharge. Swollen batteries are a safety hazard and should not be used. Replace the swollen battery and dispose of it properly. Contact Dell product support to explore options for replacing the swollen battery.
What to do if my Dell Laptop is not detecting memory/RAM?
If your Dell Laptop isn't detecting memory, first, make sure the memory module is properly installed. If the problem continues after confirming the installation, you should replace the memory module.
How to fix system board failure on Dell P139G?
To address a system board failure on your Dell Laptop, including issues like BIOS corruption or ROM errors, start by flashing the latest BIOS version. If the problem persists after updating the BIOS, the system board should be replaced.
What to do if BIOS Recovery image is not found on Dell P139G?
If your Dell Laptop displays an error indicating that the BIOS Recovery image is not found, flash the latest BIOS version. If the issue continues after updating the BIOS, the system board likely needs to be replaced.
What to do for PCI or Video card/chip failure on Dell P139G?
If your Dell Laptop is experiencing a PCI or video card/chip failure, the recommended solution is to replace the system board.
How to resolve LCD failure (SBIOS message) on Dell P139G?
To resolve an LCD failure indicated by an SBIOS message on your Dell Laptop, replace the LCD module.
General| Model | Dell P139G |
|---|---|
| Category | Laptop |
| Display Size | 13.3 inches |
| Display | Full HD (1920 x 1080) |
| Operating System | Windows 10 |
To Next Page
