What to do if Dell P138G Laptop displays error code [2,7]?
If your Dell Laptop system does not start up normally and displays error code [2,7], check to see if the display cable is properly connected.
How to fix Memory/RAM failure on Dell P138G?
If your Dell laptop is experiencing memory or RAM failure, try resetting and swapping the memory modules among the slots. If the issue continues, consider replacing the memory module.
What to do if Dell Laptop battery is swollen?
If you notice swollen rechargeable Li-ion batteries in your Dell Laptop, discontinue using the laptop. Discharge it by disconnecting the AC adapter and letting the battery drain. Replace the swollen battery and dispose of it properly. You may also contact Dell product support for options to replace the swollen battery under your warranty or service contract, including replacement by a Dell authorized service technician.
What to do if Dell P138G Laptop says invalid memory installed?
If your Dell laptop indicates that invalid memory is installed, attempt to reset and swap the memory modules between the slots. If the problem remains, you may need to replace the memory module.
What to do if my Dell Laptop battery is swollen?
If you notice that your Dell Laptop battery is swollen, immediately stop using the laptop. Disconnect the AC adapter and allow the battery to fully discharge. Swollen batteries are a safety hazard and should not be used. Replace the swollen battery and dispose of it properly. Contact Dell product support to explore options for replacing the swollen battery.
What to do if my Dell P138G Laptop is not detecting memory/RAM?
If your Dell Laptop isn't detecting memory, first, make sure the memory module is properly installed. If the problem continues after confirming the installation, you should replace the memory module.
How to fix LCD failure (SBIOS message) on Dell P138G Laptop?
If your Dell Laptop displays an LCD failure message (SBIOS message), the suggested solution is to replace the LCD module.
What to do if flash corruption is detected by SBIOS on a Dell P138G?
If SBIOS detects flash corruption on your Dell Laptop, the suggested solution is to replace the system board.
What to do if Dell P138G displays error code [2,8]?
If your Dell Laptop system does not start up normally and displays error code [2, 8], replace the system board.
How to resolve LCD failure (SBIOS message) on Dell P138G Laptop?
To resolve an LCD failure indicated by an SBIOS message on your Dell Laptop, replace the LCD module.
General safety guidelines for working inside the computer.
Steps to prepare the computer before opening it for service.
Detailed safety measures for handling components and preventing ESD.
Steps to remove and install the main system board.
Procedures for updating the system's BIOS from different methods.
Guidelines for safely handling and disposing of swollen Lithium-ion batteries.
To Next Page
General
