Dell P2424HEB - Disassembly Procedure Manual

1
DELL P2424HEB
Unplug external cables(power cable and video
cable) from the monitor.
S2
Turn off power..
1. Disassembly Procedures:
S1
Remove stand from the product.(Press the stand
release button, lift the stand up and away from the
monitor)
S3
S4
S5
S6
S7
Use a Philips-head screwdriver to remove 4pcs
screws for unlocking mechanisms. Remove DP cap.
(No.1~4 screw size=M4x11; Torque=11±1kgfxcm)
Wedge your fingers between rear cover and the
middle bezel on the corners of the top side of the
monitor to release the rear cover, then use one hand
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
2
3
4
1
3
2
1
2
Lift the rear cover up carefully. Disconnect the
joystick key cable from the connector of the main
board, and then remove the rear cover and put it
aside for later disassembling.
Use a Philips-head screwdriver to remove 3pcs screw
for unlocking the joystick board, and then tear off all
the tapes on the back of the cable and release the
joystick cable from the rear cover.
(No.1~3 screw size=M2x3.3, Torque=1±0.2kgfxcm)
2
1
3
2
1
3